News Center

The hot commissioning of the continuous decarburization and annealing coating unit for Zhongshan Zhongsheng No. 2 cold-rolled non-oriented electrical steel was successful.

Category: Shanli Blog Publish Time:2019-04-16

At 2:50 am on April 12, the continuous decarburization, annealing and coating unit for cold-rolled non-oriented electrical steel of Zhongshan Zhongsheng No.2, general contracted by Huangshi Shanli Technology Co., Ltd., successfully completed its hot load test. The production line was designed, manufactured, installed and debugged by Huangshi Shanli Company. The main equipment is completely domestically produced, using advanced and reliable silicon steel annealing technology at home and abroad. The unit speed is 135 meters/minute, with an annual output of 250,000 tons. It mainly produces non-oriented silicon steel with grades such as W470, W600, W800, W1000, and W1300. During the design and manufacturing of the unit, collaboration with the owner...
     
At 2:50 AM on April 12, the continuous decarburization, annealing, and coating unit for cold-rolled non-oriented electrical steel of Zhongshan Zhongsheng No.2, general contracted by Huangshi Shanli Technology Co., Ltd., successfully completed its hot load test run.
 
This production line was designed, manufactured, installed, and commissioned by Huangshi Shanli Company. The main equipment is entirely domestically produced, using advanced and reliable silicon steel annealing technology from both domestic and international sources. The unit speed is 135 meters/minute, with an annual output of 250,000 tons. It mainly produces non-oriented silicon steel in grades such as W470, W600, W800, W1000, and W1300.
 
During the design and manufacturing of the unit, sufficient discussions and exchanges of production experience were conducted with the owner to promptly address any shortcomings. The adoption of various new technologies and processes ensured a smooth installation and commissioning process. Overtime work was undertaken during commissioning to accelerate progress, and the commissioning procedures were rationally arranged, enabling the successful completion of the hot load test run in the shortest possible time, giving the owner a head start in the silicon steel market.
 

Keywords: The hot commissioning of the continuous decarburization and annealing coating unit for Zhongshan Zhongsheng No. 2 cold-rolled non-oriented electrical steel was successful.

Related News